network configuration page
The printer's network configuration page supplies useful information about the
printer's ethernet connection.
printing a network configuration page
While the printer is powered on and idle, press the
Cancel
button (
X
) on the printer to print a
network configuration page.
If the printer has just been connected to a network, wait a few minutes before printing the
network configuration page to allow the printer to obtain valid network settings. You will
know that the settings on the configuration page are valid if the
Status
is
Succeeded
.
network configuration page topics
The printer's network configuration page is organized into four topics.
file:///C|/hun/ug_ethernet_network_page_fs.html (1 of 4) [12/17/2002 12:55:09 PM]
network configuration page
1.
General
2.
TCP/IP
3.
Network Statistics
4.
Port Configuration
general
1
.
Network Name
:
Printer's friendly
name.
2.
URL:
IP address
for the printer's
internal web page
.
3
.
MAC Address
:
Printer's Media
Access Control address (also appears
on the label on the back of the
printer).
4
.
Serial Number:
Printer's serial
number.
TCP/IP
file:///C|/hun/ug_ethernet_network_page_fs.html (2 of 4) [12/17/2002 12:55:09 PM]
network configuration page
5
.
Status:
Printer's network status:
Succeeded
,
Failed
, or
In Progress
.
6
.
Configured by:
How the printer
obtained its
IP address
:
DHCP
,
AutoIP
,
Manual
,
Unconfigured
.
7
.
IP Address:
Printer's
IP address
.
8
.
Subnet Mask:
Printer's
subnet
mask
.
9
.
Gateway:
Printer's
gateway
address.
network statistics
file:///C|/hun/ug_ethernet_network_page_fs.html (3 of 4) [12/17/2002 12:55:09 PM]
network configuration page
10
.
Total Packets Received:
Number of
packets
received without
error.
11
.
Unicast Packets
Received:
Number of
packets
specifically
addressed to the printer.
12
.
Broadcast Packets
Received:
Number of
packets
addressed to all
devices on the network received.
13
.
Bad Packets Received:
Number of
packets
received with
errors.
14
.
Total Packets Transmitted:
Number of
packets
sent without
error.
15
.
Unicast Packets Transmitted:
Number of
packets
addressed to a
specific device on the network
transmitted.
16
.
Broadcast Packets
Transmitted:
Number of
packets
addressed to all devices on the
network transmitted.
17
.
Transmission Error Packets:
Number of
packets
not sent due to
errors.
port configuration
18
.
Port Configuration:
Type of ethernet port. This setting is determined by the network
to which the printer is connected and is not configurable from the printer.
●
10T FullDplx
: Printer can simultaneously transmit and receive data (full duplex)
at 10
Mb/s
(megabits per second).
●
10T HalfDplx
: Printer can transmit and receive data at 10
Mb/s
, but must
transmit or receive separately (half duplex).
●
100TX FullDplx
: Printer can simultaneously transmit and receive data (full
duplex) at 100
Mb/s
.
●
100TX HalfDplx
: Printer can transmit and receive data at 100
Mb/s
, but must
transmit or receive separately (half duplex).
file:///C|/hun/ug_ethernet_network_page_fs.html (4 of 4) [12/17/2002 12:55:09 PM]
ethernet glossary